Oatey 31121 Heavy-Duty Fast Set PVC Solvent Cement, 16 Oz, Gray

Oatey Heavy Duty Gray Fast Set PVC Solvent Cement is recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 18” with interference fit. Heavy Duty Gray Fast Set PVC Solvent Cement can be used for potable water, sewer and drain, waste and vent systems. This product is compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels.

Highlights:

• Size: 16 Oz.
• Very Heavy-Bodied Medium setting gray cement for use on all schedules and classes PVC pipe and fittings up to 18” diameter with interference fit.
• Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
• Formulated for quick installation of irrigation pipe and fittings.
• Builds up for large diameter installations.
• Fills gaps in large diameter pipe and loose fitting joints.
• Recommended for potable water, pressure pipe, conduit and DWV.
• Recommended application temperature 40°F to 110°F / 4°C to 43°C.
• Meets ASTM D-2564.

Physical/Chemical Properties:

• Appearance: Gray Liquid
• Viscosity: min. 1600 cps @ 73° F ± 2° F
• Density: 7.87 ± 0.2 lbs/gallon
• Shelf Life: 3 years from manufacture date
• Maximum VOC per SCAQMD 1168/316A or BAAQMD
• Method 40: 510 g/L

Lap Shear Strength (minimum per ASTM Standards):

• 2 hours: 250 psi
• 16 hours: 500 psi
• 72 hours: 900 psi

Set Up Time:

• 30° F to 50° F: 3 – 4 minutes
• 50° F to 70° F: 1-1/2” – 3 minutes
• 70° F to 90° F: 1-1/2” – 2 minutes